The rubber hose is mainly composed of an inner rubber layer with good water and abrasion resistance, a multi-layer cloth/cable/wound wire layer, a spiral steel wire frame reinforced layer, and an outer rubber layer with good weatherability and weather resistance. The negative pressure water suction large-diameter water hose adopts a double spiral steel skeleton structure. The rubber tube hose produced by our factory has the advantages of small outer diameter tolerance, excellent water resistance, light weight, and soft and durable tube body. The smaller burst pressure of the rubber tube hose can reach the working pressure. Low pressure hose Note The high pressure hose is our company. One of the main supply products, in order to make everyone better use the rubber hoses below to introduce the related matters when using:
Rubber hoses should not bend excessively when they are moving or at rest. They must not bend at the roots. They must begin to bend at least 1.5 times their diameter. Rubber hoses must not be pulled too tight when they are moved to extreme positions. Relaxation; try to avoid the torsional deformation of the rubber tube hose; rubber tube hose away from the heat radiation components as much as possible, necessary fashion insulation board; should avoid external damage to the rubber tube hose, such as the use of long-term friction with the component surface; When the rubber tube hose is excessively deformed due to its own weight, there should be supporting pieces. Also keep hose hose loose.
When the steel wire braided rubber hoses is pressurized, changes in length and diameter occur, and the tensioned hose will expand under pressure, resulting in reduced strength. Four times the force. All types of cloth/clamping/steel wire armored large-diameter water hoses are manufactured according to different operating conditions and are made of appropriate materials. The product structure is designed with reasonable quality and is durable.